Reversing The Door Swing - Summit FF1117BL Series Owner's Manual

Reversing the Door Swing:

The doors of the refrigerator-freezer can be hinged on either side so that the door
swing can be suited to the location of the installation.
Tools Required:
•
standard screwdriver
•
large Phillips head screwdriver
•
socket wrench (3/8")
In order to reverse the position of the door hinges, refer to the disassembly
diagram below and follow this procedure.
Remove the hinge cap by twisting it off.
1.
Remove the upper hexagonal-head screws. The top hinge and the freezer
2.
door can now be removed.
Remove the middle hexagonal screws. The middle hinge and the refrigerator
3.
door can now be removed.
Remove the cover and screws for the middle hinge holes on the left side and
4.
re-attach them symmetrically to the holes on the other side
6
.