Vivotek SUPREME use IP FE9582-EHNV User Manual page 351

8.35 Get wireless signal strength
0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwlsignalstrength.cgi
PARAMETER VALUE
N/A N/A
8.36 WPS transaction
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/start_wps.cgi
PARAMETER VALUE
N/A N/A
8.37 Washer control
(capability_peripheral_c<0~(n-1)>_washer_support > 0)
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/washerctrl.cgi?<parameter>=<value>
PARAMETER VALUE
setstatus on
off
(capability_network_wireless >
DESCRIPTION
Get wireless signal strength.
(capability_network_wireless > 0)
DESCRIPTION
Start WPS transaction.
DESCRIPTION
Enable the functionality of washer, it shall refer to
"camclean_c<0~(n-1)>_washer_dwelltime" and
"camclean_c<0~(n-1)>_washer_mode" parameters.
Disable the functionality of washer.
VIVOTEK
User's Manual - 351