Vivotek SUPREME use IP FE9582-EHNV User Manual page 345

getminpan 0, <positive integer>
getmaxpan 0, <positive integer>
getminpanangle <integer>
getmaxpanangle <integer>
getmintilt 0, <positive integer>
getmaxtilt 0, <positive integer>
getmintiltangle <integer>
getmaxtiltangle <integer>
getminzoom 0, <positive integer>
getmaxzoom 0, <positive integer>
getmaxdzoom 0, <positive integer>
getmaxratio <decimal>
getmaxdratio <decimal>
getminfocus 0, <positive integer>
getmaxfocus 0, <positive integer>
Get the lower limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan position.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for pan angle.
*Only available when bit0 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt position.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the upper limit for tilt angle.
*Only available when bit1 of
"capability_camctrl_c<0~(n-1)>_buildinpt" is "1"
Get the lower limit for zoom position.
Get the upper limit for zoom position.
Get the upper limit for digital zoom position.
Get the maximum ratio of optical zoom.
* We support this parameter when the version number (getversion) is
equal or greater than 5.0.0.14
Get the maximum ratio of digital zoom.
* We support this parameter when the version number (getversion) is
equal or greater than 5.0.0.14
Get the lower limit for focus position.
Get the upper limit for focus position.
VIVOTEK
User's Manual - 345