Vivotek SUPREME use IP FE9582-EHNV User Manual page 242

VIVOTEK
remotecamctrl_slave
fisheyelocaldewarp_c<0~
(capability_nvideoin)-1>
<product dependent>
Group: capability_camctrl_c<0~(n-1)> n denotes the value of "capability_nvideoin"
(capability_ptzenabled > 0)
* We support this group when the version number (httpversion) is equal or greater than 0303b.
PARAMETER
ptztunnel
privilege
rs485
buildinpt
242 - User's Manual
integer>
<boolean> 0/7
0, <positive 0/7
integer>
VALUE SECURITY
(get/set)
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
camera (master side), this value means
supporting max number of auxiliary camera.
Indicate whether to support remote camera
control (slave side).
Indicate the supported streams of local
dewarp. One bit represents one supported
stream. The LSB indicates stream 0.
Ex: "3" means stream 0 and stream 1 support
local dewarp.
* Only available when "capability_fisheye" > 0
DESCRIPTION
Indicate whether to support ptztunnel in this
video input.
Indicate whether to support "Manage Privilege"
of PTZ control in the security page in this video
input.
1: support both /cgi-bin/camctrl/camctrl.cgi and
/cgi-bin/viewer/camctrl.cgi
0: support only /cgi-bin/viewer/camctrl.cgi
An 32-bit integer, each bit can be set separately
as follows:
Bit 0 => support rs485-in
Bit 1 => support rs485-out
An 32-bit integer, each bit can be set separately
as follows:
Bit 0 => support build-in pan
Bit 1 => support build-in tilt