Vivotek SUPREME use IP FE9582-EHNV User Manual page 350

VIVOTEK
8.33 Connet to AP
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/connect_ap.cgi
PARAMETER VALUE
N/A N/A
8.34 Get wireless information
Note: This request requires Administrator privileges.
Method: GET/POST
Syntax:
http://<servername>/cgi-bin/admin/getwirelessinfo.cgi
PARAMETER VALUE
N/A N/A
350 - User's Manual
(capability_network_wireless > 0)
DESCRIPTION
Apply the wireless settings and connect to AP.
(capability_network_wireless > 0)
DESCRIPTION
Get wireless information. Camera will return following information.
1. Wireless channel
2. Link quality
3. Signal level
4. Noise level
5. SNR
6. TX Rate
7. RX Rate