Before First Use - Atag VA55111BT User Manual

20
ment of the level of the water softener oc-
curs and when the programme is comple-
ted.
By default, the acoustic signals are on, but
it is possible to deactivate them.
How to deactivate the acoustic signals
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to "Setting and
starting a programme".
2. Press and hold, at the same time, but-
ton and button
dicators of buttons
start to flash.

BEFORE FIRST USE

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
Adjusting the water softener
German
degrees
(°dH)
47 - 50
43 - 46
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
How to adjust the level of the water
softener
1. Press the on/off button to activate the
appliance. Make sure that the appliance
is in setting mode, refer to "Setting and
starting a programme".
until the in-
, and
Water hardness
French mmol/l
degrees
(°fH)
84 - 90 8.4. - 9.0
76 - 83 7.6 - 8.3
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
3. Press button
• The indicators of buttons
go off.
• The indicator of button
ues to flash.
• The display shows the current setting.
4. Press button
ting.
5. Press the on/off button to deactivate the
appliance and to confirm the setting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Clarke
degrees
58 - 63
53 - 57
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
2. Press and hold, at the same time, but-
ton and
dicators of buttons
start to flash.
3. Press button
.
and
contin-
Acoustic signals on.
Acoustic signals off.
to change the set-
Water softener
adjustment
Level
10
9
8
7
6
1)
5
4
3
2
2)
1
button until the in-
, and
.