Set Up An Iptv Port To Lease An Intranet Port - NETGEAR RBK20 User Manual

(Continued)
Field
Priority
Select the check box for a wired Ethernet port.
If your device is connected to an Ethernet port on the router, select the Ethernet port check box that
corresponds to the Ethernet port on the router to which the device is connected.
You must select at least one Ethernet port. You can select more than one port.
9. Click the Add button.
The VLAN tag group is added.
10. Click the Apply button.
Your settings are saved.

Set Up an IPTV Port to Lease an Intranet Port

You can set up the router to create an Internet Protocol television (IPTV) port that can
lease an IP address from your IPTV service provider. Use this feature only if you subscribe
to an IPTV service and your IPTV service requires an intranet address.
Some IPTV ports cannot work behind Network Address Translation (NAT) because the
IPTV port requires an IP address within the Internet service provider's network (intranet
address).You can set up a bridge connection from the WAN to one of the LAN ports.
When IPTV is connected through WiFi, the home router also must support the bridging
of the WAN port to the WiFi network name (SSID). The designated LAN port becomes
an IPTV port with direct access to the WAN without going through NAT.
To configure an IPTV port:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the Orbi admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced Setup > VLAN/Bridge Settings.
The VLAN / Bridge Settings page displays.
Specify Network Settings
Orbi WiFi System
Description
Enter a value from 0 to 7.
93 User Manual