Sync An Add-On Satellite; Log In To Your Router And Add Satellites To Your Network - NETGEAR RBK20 User Manual

Sync an Add-On Satellite

If you already set up an Orbi router and satellite are adding an optional add-on satellite
(sold separately), follow these steps.
To sync your add-on satellite:
1. Place your satellite.
For more information, see Examples of Placement for Multiple Satellites on page
20.
2. Connect the satellite to a power source.
3. If the Power LED on the back of the satellite does not light, press the Power On/Off
button.
4. Wait about two minutes for the satellite ring LED to light solid white.
5. Press the Sync button on the back of the satellite and within two minutes, press the
Sync button on the back of your Orbi router.
The satellite ring LED pulses white, then lights one of the following colors for about
three minutes, and then turns off:
• Blue. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is good.
• Amber. The Orbi router and satellite successfully synced, and the connection
between the router and satellite is fair. Consider moving the Orbi satellite closer
to the Orbi router.
• Magenta. The Orbi router and satellite failed to sync. Move the satellite closer
to the router and try again.

Log In to Your Router and Add Satellites to Your Network

You can use the router web interface to add a satellite to your Orbi network.
To add a satellite to your Orbi network using the router web interface:
1. Launch a web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
Overview
Orbi WiFi System
23 User Manual