Set Up An Iptv Port To Lease An Intranet Port - NETGEAR XR500 Nighthawk User Manual

The page expands.
6. Select the By VLAN tag group radio button.
The page expands.
7. Click the Add button.
The Add VLAN Rule page displays.
8. Specify the following settings:
• Name. Enter a name for the VLAN tag group. The name can be up to 10 characters.
• VLAN ID. Enter a value from 1 to 4094.
• Priority. Enter a value from 0 to 7.
• Select the check box for a wired LAN port or WiFi port.
- If your device is connected to an Ethernet port on the router, select the LAN port check box that
corresponds to the Ethernet port on the router to which the device is connected.
- If your device is connected to your router's WiFi network, select the WiFi check box that
corresponds to the router's WiFi network to which the device is connected.
You must select at least one LAN port or WiFi port. You can select more than one port.
9. Click the Apply button.
The VLAN/Bridge Settings page displays again. The VLAN tag group is added to the table on that page.
10. Click the Apply button.
Your settings are saved.

Set Up an IPTV Port to Lease an Intranet Port

You can set up the router to create an Internet Protocol television (IPTV) port that can lease an IP address
from your IPTV service provider. Use this feature only if you subscribe to an IPTV service and your IPTV
service requires an intranet address.
Some IPTV ports cannot work behind NAT because the IPTV port requires an IP address within the Internet
service provider's network (intranet address). You can set up a bridge connection from the WAN to one of
the LAN ports. When IPTV is connected through WiFi, the home router also must support the bridging of
the WAN port to the WiFi network name (SSID). The designated LAN port or WiFi network name becomes
an IPTV port with direct access to the WAN without going through NAT.
To set up an IPTV port to lease an intranet port from your IPTV service provider:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
XR500 Nighthawk Pro Gaming Router
Manage the Router's Network Settings
81