Place Your Satellite; Examples Of Placement For One Satellite - NETGEAR RBK20 User Manual

3. Connect your modem to the Internet port of your router with the yellow Ethernet
cable that came with your router.
The router shown in this is the Orbi router (model RBR50). The same setup applies
to all Orbi routers.
4. Connect the power adapter to your router and plug the power adapter into an outlet.
5. If the Power LED does not light, press the Power On/Off button on the rear panel
of the router.

Place Your Satellite

If your satellite came with your Orbi WiFi System, the satellite attempts to sync with your
router. If you bought an add-on satellite, you must manually sync your satellite. For more
information, see Sync Your Orbi Satellite on page 22.
Note that your satellites must be within range of your router's WiFi signal in order for it
to sync with the router. Use each satellite's ring LED to help you determine where to
place your satellite.

Examples of Placement for One Satellite

The following images are examples of where to place your router and satellite. The
router shown in the following images is the Orbi router model RBR50 and the satellite
shown in the images is the Orbi satellite model RBS50.
Overview
Orbi WiFi System
18 User Manual