Table of Contents
Advertisement
L
—Allows you to set the language for the OSD. Press
ANGUAGE
Language menu.
P
M
—Allows you to select the projector mode, depending upon how
ROJECTOR
ODE
the projector is mounted.
•
Front Projection-Desktop — This is the default option.
•
Front Projection-Ceiling Mount — The projector turns the image upside
down for ceiling-mounted projection.
•
Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
•
Rear Projection-Ceiling Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a ceiling-
mounted projection.
A
K
—Select On to enable the auto correction for vertical image
UTO
EYSTONE
distortion caused by tilting the projector.
V. K
—Manually adjust the vertical image distortion caused by tilting the
EYSTONE
projector.
A
V
—Allows you to set buzzer alert loudness (Off, Low, Mid or High) for
LERT
OLUME
power on/off, warning and command keys.
to activate the
Using Your Projector
41
Advertisement
Table of Contents
