Original — Select Original to maintain the aspect ratio of image projected
according to input source.
4:3 — The input source scales to fit the screen and projects a 4:3 image.
Wide — The input source scales to fit the width of the screen to project a
wide screen image.
image to the right.
—Allows you to change the display data clock frequency to match the
frequency of your computer graphics card. If you see a vertical flickering wave, use
Frequency control to minimize the bars. This is a coarse adjustment.
—Synchronize the phase of the display signal with the graphic card. If you
experience an unstable or flickering image, use Tracking to correct it. This is a fine
Using Your Projector
to activate Zoom menu.
Select the area to zoom and press
Adjust the image scale by pressing
to move the image to the left and
to move the image down and
to activate Zoom Navigation
to navigate projection screen.
to view zoomed image.
to move the
to move the image