Introduction For Buttons On Remote Controller - Prem-I-Air EH0537 Installation Manual

Introduction for buttons on remote controller

4
FAN button
Pressing this button can select fan speed circularly as: AUTO, SPEED 1 (
SPEED 2 ( ) , SPEED 3 (
Speed 4 is the same with speed 3.).
SPEED 1 (equals to low fan speed)
SPEED 3 (equals to high fan speed)
Note:
● Under Auto speed, air conditioner will select proper fan speed automatically
according to ambient temperature.
● Fan speed can't be adjusted under Dry mode.
5
SWING button
Press this button to turn on left & right air swing.
6
SLEEP button
Under Cool mode, press this button to turn on Sleep function. Press this button to
cancel Sleep function. Under Fan, Dry and Auto mode, this function is unavailable.
7
TIMER button
●
When unit is on, press this button to set Timer Off. T-OFF and H icon will be
blinking. Within 5s, press + or - button to adjust the time for Timer Off. Pressing
+ or - button once will increase or decrease the time by 0.5h. Hold + or - button for
2s, time will change quickly. Release the button after your required set time is
reached. Then TIMER button to confirm it. T-OFF and H icon will stop blinking.
●
When unit is off, press this button to set Timer On. T-ON and H icon will be
blinking. Within 5s, press + or - button to adjust the time for Timer On. Pressing
+ or - button once will increase or decrease the time by 0.5h. Hold + or - button for
2s, time will change quickly. Release the button after your required set time is
reached. Press TIMER button to confirm it. T-ON and H icon will stop blinking.
● Cancel Timer On/Off: If Timer function is set up, press TIMER button once to
review the remaining time. Within 5s, press TIMER button again to cancel this
function.
), SPEED 4 ( ) (unavailable in this air conditioner.
SPEED 2 (equals to mid fan speed)
SPEED 4 (equals to high fan speed)
),