Using Your Philips Lumea; Skin Tone Sensor; Selecting The Right Light Intensity - Philips Lumea SC1997/00 Manual

Using your Philips Lumea

Skin tone sensor

Attachments

Selecting the right light intensity

For extra safety the integrated skin tone sensor measures the skin tone at
the beginning of each session and occasionally during the session. If it
detects a skin tone that is too dark for treatment with Lumea, the device
automatically disables to prevent you from developing skin reactions. This
means that it does not emit pulses when you press the flash button.
Placing and removing
To place the attachment, simply snap it onto the light exit window.
To remove the attachment, pull it off the light exit window.
Body attachment
You can use the body attachment to treat unwanted hair on several body
areas below the neckline. You can use it for example for fast treatment of
larger areas like legs.
Precision attachment
The precision attachment includes an additional integrated light filter for
extra safety and you can therefore use it to treat unwanted facial hair on the
upper lip, chin and sideburns. You can also use the precision attachment to
easily treat hard to reach areas such as toes, bikini area or armpits.
However, do not treat your eyebrows with Lumea.
Lumea provides 5 different light intensities. Depending on your skin type
and light intensity level you find comfortable, you can select the right light
intensity setting.
1 Consult the table below to select the right setting.
English
11