Using Your Philips Lumea; Placing And Removing; Selecting The Right Light Intensity - Philips Lumea SC1993/00 Manual

Using your Philips Lumea

Placing and removing

Selecting the right light intensity

Skin type
I
II
III
IV
To place the attachment, simply snap it onto the light exit window.
To remove the attachment, pull it off the light exit window.
Lumea provides 5 different light intensities. Depending on your skin type
and light intensity level you find comfortable, you can select the right light
intensity setting.
1 Consult the table below to select the right setting.
2 To adjust the light intensity setting, press the on/off button one or more
times until you have reached the required setting. The corresponding
intensity light lights up white.
3 Lumea should never be painful. If you experience discomfort, reduce the
light intensity setting.
4 After recent tanning, perform a skin test to determine the right light
intensity setting.
Skin tone
White; You always sunburn,
never tan.
Beige; You easily sunburn, tan
minimally.
Light brown; You sunburn easily,
tan slowly to light brown.
Mid brown; You rarely sunburn,
tan easily.
English
Light intensity setting
4/5
4/5
4/5
3/4
11