Using Your Philips Lumea; Skin Tone Sensor; Selecting The Right Light Intensity - Philips Lumea BRI861 Manual

Using your Philips Lumea

Skin tone sensor

Selecting the right light intensity

For extra safety, the integrated skin tone sensor
measures the skin tone at the beginning of each
session and occasionally during the session. If it
detects a skin tone that is too dark for treatment
with Lumea, the 'ready to flash' light starts blinking
orange and the device automatically disables to
prevent you from developing skin reactions. This
means that it does not emit pulses when you press
the flash button.
Lumea provides 5 different light intensities.
Depending on your skin type and on what you find
comfortable, you can select the right light intensity
setting.
1 Consult the table below to select the right
setting.
2 To adjust the light intensity setting, press the
on/off button one or more times until you have
reached the required setting. The
corresponding intensity light level lights up
green. You can change the setting at all times.
Note: The integrated skin tone sensor does not
automatically select a light intensity setting for
you, but only warns you when your skin is too
dark for treatment.
Note: The device automatically disables when
your skin tone is too dark, to prevent you from
developing skin reactions. The 'ready to flash'
19
English