Table of Contents
Advertisement
Unpack the Cooktop
WARNING
•
If the gas and electric service provided does not
meet the product specifications, do not proceed with
the installation. Call the dealer, the gas supplier or a
licensed electrician.
•
The cooktop is heavy. A minimum of two people are
required to safely install it.
Unpack the parts box and verify that all required compo-
nents have been provided. If any item is missing or dam-
aged, please contact your dealer immediately. Do not install
a damaged or incomplete appliance. The customer must
report cosmetic issues within 30 days of installation.
*
•
Grates (3)
•
Burner caps (6)
•
Burner rings (6)
•
Hold down bolts/washers (2 sets)
•
Regulator
•
Dacor Stainless Steel Cleaner
•
Igniter cleaning brush
•
Literature kit
•
WOK ring
•
Griddle
•
Simmer plate
•
Spatula
*
Model ESG486 comes with (3) 14 inch grates. Model
ESG366 comes with (2) 10-inch grates and (1) 14-inch
grate.
8
Installation Instructions
Cooktop Installation
WARNING
•
To prevent damage to the gas pressure regulator,
install it only after the cooktop is mounted in its perma-
nent position.
•
Do not over-tighten the hold down bolts. Over tighten-
ing the hold down bolts may result in improper opera-
tion of the dual gas burners.
IMPORTANT
Do not use a hardening compound or caulk to
permanently seal the cooktop into place. The cooktop
must be readily removable if service is required. Removal
of sealant to service the unit will be performed at the
customer's expense.
1.
Lower the cooktop into the cutout while feeding the
electrical cord into the utility cutout. Center the cooktop
in the cutout.
2.
Secure the cooktop to the countertop using the two (2)
provided hold-down bolts and washers provided. Do
not overtighten the bolts.
Hide quick links:
Advertisement
Table of Contents
