Electro-Voice EKX-15SP Manual page 31

▪
LCD DIM Menu
The LCD Dim menu is used to dim the display when the display is idle for two minutes.
Available options for this selection are: ON or OFF.
The default is ON.
The range is 1 to 10.
BRIGHT Menu
The Bright menu is used to determine the brightness of the LCD.
The range is 1 to 10.
The default is five (5).
CONTRAST Menu
The Contrast menu is used to determine the contrast on the LCD.
The range is 1 to 10.
The default is five (5).
STORE Menu
The Store menu allows you create up to five customized user settings. Available options for
this selection are: EXIT, 1, 2, 3, 4, and 5.
Notice!
The customized user setting name can contain a combination of alphanumeric characters
including spaces. The alphanumeric character range is A to Z and 0-9.
The name field length is 12 characters.
To store customized user settings, do the following:
1.
2.
3.
4.
5.
6.
7.
Electro-Voice
LIMIT – turns the LED off under normal operation. The LED brief blinking indicates the
limiter is activating. Short-term blinking is not critical because the integrated limiter
keeps distortion under control. Constant lighting of the LED indicates the sound is
negatively affected. If the LED is constantly lit, check the rear LCD for more information.
Reducing the output volume is strongly recommended.
From the DSP menu, scroll to STORE.
Push the MASTER VOL knob to select STORE.
The store screen appears.
Push the MASTER VOL knob to select 1.
The Enter name for 1 screen appears.
Use the MASTER VOL knob to scroll through the characters.
The characters appear.
Push the MASTER VOL knob to select the desired character.
Turn the MASTER VOL knob to move to the next character entry.
Continue selecting characters until the desired name is entered.
Use the MASTER VOL knob to scroll to SAVE.
User Manual
en 31
2017.01 | 06 | F.01U.318.952