Tripod And Floor Monitor Operation; Tripod Or Pole Mount - Electro-Voice EKX-15SP Manual

4

Tripod and floor monitor operation

4.1

Tripod or pole mount

EKX-12P and EKX-15P loudspeakers mount on a tripod stand or on a pole above a subwoofer.
Mounting a loudspeaker on a tripod stand
Figure 4.1: Full-Range models on a tripod stand
Caution!
Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod
!
stand to be certain it is capable of supporting the weight of the loudspeaker.
Caution!
! Two person lift and placement is recommended for the heavier loudspeakers. Single person
lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1.
▪
▪
▪
2.
3.
Electro-Voice
Place the tripod stand on a level stable surface.
Fully extend the legs on the tripod stand.
Do not compromise the tripod stands structural integrity by trying to make the stand
taller.
Do not attempt to suspend more than one loudspeaker on a stand designed for a single
loudspeaker.
Using two hands lift the loudspeaker.
Set the pole cup located on the bottom of the loudspeaker onto the pole.
User Manual
en 13
2017.01 | 06 | F.01U.318.952