Electro-Voice EKX-15SP Manual page 21

8.
Subwoofer control and monitoring interface
The subwoofer DSP control menu selections are available for the EKX-15SP and EKX-18SP.
Figure 6.2: Subwoofer amplifier panel
1.
2.
3.
4.
5.
6.
7.
Electro-Voice
RCA INPUT – Stereo unbalanced RCA inputs for connecting external audio media devices,
such as MP3 players. Both RCA inputs are summed and can be controlled with INPUT 1
level. The inputs can be used simultaneously with XLR/TRS INPUT 1.
LCD – DSP control and monitoring interface.
MASTER VOL – Adjusts the sound level.
DSP – Scroll through the menu and select the available choices. Push the MASTER VOL
knob to enter the DSP menu.
INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼ inch TRS or XLR
connectors.
POWER – AC switch or switching the power ON or OFF. The LCD screen lights up when
the power is turned ON, after approximately 3 seconds.
MAINS IN – AC connection is established via an IEC-connector.
OUTPUT – XLR output sends the input signal to another loudspeaker or subwoofer.
INPUT 1 is linked to OUTPUT 1 and INPUT 2 is linked to OUTPUT 2. The MASTER VOL or
DSP control settings do not affect OUTPUT.
POWER – AC switch for switching the power ON or OFF. The LCD screen lights up when
the POWER is turned ON.
User Manual
en 21
2017.01 | 06 | F.01U.318.952