Advertisement
Electronic pellet burner controller – NPBC-V3C-K / NPBC-V4C-K / NPBC-V4E-K
Timers – Set and activate time intervals when the burner's work is allowed. If even one timer is
activated, the burner will work only during this interval. Moreover, the rest of the required
conditions must also be presented, such as: the work mode must be anything but "Standby", the
temperature of the water in the boiler must be below the set temperature, OD and RT inputs must
not be active and there should not be any errors that require the burner to stay off.
If there is a check sign,
the timer is active
The time in the column "On" must be before the time in the column "Off"! If necessary, set the
"Off" time first, to provide larger range for the "On" setting.
When using timers to control the burner, it is more convenient to get information about their current
state and their next action from one of the information fields on the main screen.
If there are active timers and the burner is turned on, the timers will be excluded by pressing and
holding the button "On. / Off. " for more than 2 seconds.
User Manual / ver3.8
Turn on the LEDs only fot
the days of the week when
this particular should be active
Light green LED - ON
Dark green LED - OFF
Days of the week
Page 3 of 33
Advertisement
