Electronic pellet burner controller – NPBC-V3C-K / NPBC-V4C-K / NPBC-V4E-K
To reset the total pellet consumption press and hold the Menu button for more than 2 seconds.
To go back to Pellet consumption charts, press the left navigation button (◄).
Information about the WiFi modem and the Internet connection
While on Information screen, press the down navigation button (
Description of the fields
ID – unique identification number for each modem
IP – Modem's IP address
WiFi mode – Modem's current state can be any of the following:
Idle – No connection with WiFi router
•
Access point – The modem is waiting for the local WiFi network's SSID and password
•
AP Associated – The modem is connected to a router
•
Internet Access – Established internet connection
•
Connected – The modem is connected to the information system's server
•
Snd/Rcv – Sent/Received data packages
If the control module NRC-6 is not equipped with a WiFi modem, there is only one message on the
screen:
User Manual / ver3.8
:
▼)
to access the second page.
Page 3 of 33