Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions lightning and power-line surges. If thunder or lightning is common where the equipment is installed, use a surge protection device.
IDIS Co., Ltd. reserves all rights concerning this document. Use or duplication of this document in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this document are subject to change without prior notice for reasons such as functionality enhancements.
Page 4
Overview • Product color and design may vary depending on the model. GND 3 • For more details on each part name, refer to the manual. Front Side Protective Cover Mount Bracket SD Memory Card Slot VIDEO DC 12V FGND NETWORK DC-B1103 / Built-in Microphone...
Camera Installation information about soldering on the lens control wire, refer to the lens manufacturer's manual. Remove the protective cover from the camera. Turn the lens in clockwise direction, mount it on to the camera, and connect the auto iris jack to the CS-Mount Lens auto iris lens connector.
Page 6
IDIS Co., Ltd. For more information, please visit www.idisglobal.com...
Need help?
Do you have a question about the DirectIP DC-B1100 and is the answer not in the manual?
Questions and answers