Safety Precautions WARNING RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. Important Safeguards 1. Read Instructions lightning and power-line surges. If thunder or lightning is common where the equipment is installed, use a surge protection device.
IDIS Co., Ltd. reserves all rights concerning this operation manual. Use or duplication of this operation manual in part or whole without the prior consent of IDIS Co., Ltd. is strictly prohibited. Contents of this operation manual are subject to change without prior notice for reasons such as functionality enhancements.
Page 4
Overview • Product color and design may vary depending on the model. • For more details on each part name, refer to the operation manual. DC-D1223WX Model DC-B1203X Model Front Wall/Ceiling Lens Installation Hole Built-in Microphone Image Sensor Dome Cover Screw...
Camera Installation Side DC-D1223WX Model Attach the enclosed desiccant beside the safety VIDEO DC 12V wire screw inside the dome cover to prevent FGND NETWORK moisture. Protective Cover Mount Bracket C-Mount Ring SD Memory Card Slot Back Focus Adjustment Ring Guide Pattern GND 3 RS485 Port...
DC-B1203X Model Attach the dome cover to the bottom cover. Use the provided screws to secure the dome cover on to the bottom cover. Connect the power. CS-Mount Lens Check the wall or ceiling to see if it needs to be reinforced. The camera may fall off if the wall or ceiling is not strong enough to support its weight.
Power Consumption Max. 5.1W Certifications FCC, CE, KC, IP66 DC-B1203X Model Exterior Dimensions (W x H x D) 75.62mm x 61.02mm x 129.32mm (2.98” x 2.4” x 5.09”) Packaging Dimensions (W x H x D) 194mm x 113mm x 149mm (7.64” x 4.45” x 5.87”) Weight (Main Unit) 0.4 kg (0.88 lbs.)
Need help?
Do you have a question about the DC-B1203X and is the answer not in the manual?
Questions and answers