Removal of rear castor arm
Preparation
Note! Switch off the wheelchair via remote control
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the rear
castor arm from the wheelchair base.
• Rebuild the wheelchair in reverse order once completed.
• In order to complete this, you must first tilt the chair
back, electircally disconnect the batteries and remove the
batteries.
Fig. 6.2.25
1. Unscrew and remove bolt (A) from the suspension spring
Tightening torque for (B) bolts is 12Nm.
Fig. 6.2.26
2. Unscrew and remove bolt (B) bolt from the rear castor arm
Tightening torque for (B) bolts is 12Nm.
Fig. 6.2.27
3. Remove the connecting cable (C) from the underside of the rear
castor arm, which connects the wheelchair base
26
Tools used
6
5
1
A
2
B
19
Fig. 6.2.25
Fig. 6.2.26
Fig. 6.2.27
3
C
Q700M Rev.A