Removal of motor from base
Preparation
Note! Switch off the wheelchair via remote control
Instructions
Note! Suitable work area required!
• Follow the illustrated instruction for removing the motor
from the wheelchair base.
• Rebuild the wheelchair in reverse order once completed.
• In order to complete this, you must first remove the drive
wheel.
Fig. 6.2.11
1. Unscrew and remove bolt (A)
Tightening torque for (A) bolts is 12Nm.
Fig. 6.2.12
2. Unscrew and remove 2 (B) bolts from the crash bracket
Tightening torque for (B) bolts is 40Nm.
3. Remove the crash bracket (C) from the base
Fig. 6.2.13
4. Slide and manoeuvre motor (D) off the base
Q700M Rev.A
Tools used
6
19
Fig. 6.2.11
A
1
Fig. 6.2.12
3
C
B
2
Fig. 6.2.13
4
D
19