HOMCOM 824-003 Assembly Instruction Manual page 6

1. Place the FAN on a stable flat surface. Plug the cord set into a
220-240V~A.C. electrical outlet.
2. POWER: Turn the FAN on by pressing the 'POWER' button; Turn the FAN
off by pressing the 'POWER' button again.
3. SPEED: You can adjust the fan speed to the desired level: low, medium, or
high by pressing 'SPEED'. The speed setting is displayed on the LED
screen (shown in FIGURE 4).
4. MODE: Pressing the' MODE' button will set the FAN into NORMAL,
NATURAL, and SLEEP mode.
5. TIMER: The fan is equipped with a timer that allows you to set it's length of
operation from 1 hour to 12 hours（834-004/834-005）, and from 0.5 hour to
7.5hours （834-003）.
6. OSC: Pressing the 'OSC' button will start and stop the oscillation function.
The symbol is displayed on the LED screen.
7. TEMP: Once the unit plug into the power socket or switch on, the FAN will
show the room temperature, and the 'TEMP' will change to 'TIMER' when the
timer is set.
8. Power save mode: when the 'sleep' mode or the 'timer' is on, the main
display will be off after 30 seconds, and you can press any keys to turn on the
display again .
PAGE 6/7
(FIGURE 3)