3.10 Platform Extension - JLG R2632 Operation And Safety Manual

SECTION 3 - MACHINE CONTROLS, INDICATORS, AND OPERATION

3.10 PLATFORM EXTENSION

This machine is equipped with an extension deck that allows the
operator better access to certain work areas. The deck extension adds
length to the front of the platform.
3-16
FOR MAXIMUM CAPACITY OF THE DECK EXTENSION, REFER TO MACHINE DIMENSIONS
IN SECTION 6.2, OR REFER TO THE CAPACITY PLACARD ON THE PLATFORM BILL-
BOARD.
DO NOT LOWER THE PLATFORM WITHOUT COMPLETELY RETRACTING THE PLATFORM
EXTENSION.
To extend the deck:
1. Press foot down on locking mechanism lever (1). While hold-
ing the lever, slide the top handrails (2) until the locking
mechanism pin clears the rear platform extension lock (3).
2. Grasp the top handrails (2) of the extension deck and push
out until the locking mechanism pin is locked into one of the
forward platform extension locks (4 or 5).
To retract the deck:
1. Press foot down on locking mechanism lever (1). Hold down
on the lever and pull in the top handrails (2) until the locking
mechanism pin clears the forward platform extension locks
(5 and 4).
2. Grasp the top handrails (2) of the extension deck and pull
back until it hits the stops. Verify the locking mechanism pin
locks into the rear platform extension lock (3).
31215090