Table of Contents
Advertisement
If you press
the hours for DURATION
setting of the END
function.
6.3 Setting the MINUTE
MINDER
1. Press
and "00" flash in the display.
2. Press
MINDER.
First you set the seconds, then the
minutes and then the hours.
At first, the time is calculated in
minutes and seconds. When the time
you set is longer than 60 minutes, the
symbol
The appliance now calculates the time in
hours and minutes.
3. The MINUTE MINDER starts
automatically after five seconds.
After 90% of the set time, an acoustic
signal sounds.
7. USING THE ACCESSORIES
WARNING!
Refer to Safety chapters.
7.1 Inserting the accessories
Wire shelf:
Push the shelf between the guide bars of
the shelf support and make sure that the
feet point down.
when you set
, the appliance goes to
.
or
to set the MINUTE
comes on in the display.
4. When the set time ends, an acoustic
signal sounds for two minutes.
"00:00" and
Press any button or open the oven
door to stop the acoustic signal.
If you set the MINUTE
MINDER when the
DURATION
function operates, the
symbol
comes on in the
display.
6.4 Count Up Timer
Use the Count Up Timer to monitor how
long the oven operates. It is on
immediately when the oven starts to
heat.
To reset the Count Up Timer, press and
hold
and
. The timer starts to count
up again.
The Count Up Timer cannot
be used with the functions:
Duration
Deep pan:
Push the deep pan between the guide
bars of the shelf support.
Wire shelf and the deep pan together:
Push the deep pan between the guide
bars of the shelf support and the wire
shelf on the guide bars above.
ENGLISH
11
flash in the display.
or END
, End
.
Advertisement
Table of Contents
