Canon Laser Shot LBP-1120 User Manual page 39

1
2
2
2-12 Printing from the Multi-Purpose Tray
Fan a stack of paper, then tap the stack of paper on a flat
surface to properly align the edges.
IMPORTANT
•
When fanning or aligning transparencies, always hold the edges, to avoid touching
the print side.
•
Be sure to load a stack of transparencies after thoroughly fanning them. Not
fanning them properly may cause the transparencies to overlap, causing paper
jams.
•
Take care not to mark/stain the print side of the transparencies with fingerprints,
dust, or oil. This may cause poor print quality.
•
If the leading edge of the paper is bent or curled, straighten out the paper before
loading it into the tray.
Load the stack of paper into the multi-purpose tray as
illustration below.
IMPORTANT
•
Do not force the paper into the printer.
•
Do not load more than 125 sheets of 64 g/m
12.5 mm.
2
, or a stack of any paper higher than