Canon Laser Shot LBP-1120 User Manual page 32

Label Sheets
Label sheets are paper with pressure-sensitive adhesive. Acceptable sizes are
Letter and A4. Follow these guidelines when choosing a label sheet:
IMPORTANT
•
The label print face (top, or face sheet) must be made of ordinary, matte-finish paper
similar to copy paper.
•
The paper backing must be able to withstand the heat generated by the fixing unit
(about190°C or 374°F). The backing must not be made of easily removable coated paper.
•
Do not use labels with exposed adhesive, which may stick to the cartridge or the fixing
roller, causing the labels to peel off and serious paper jams to occur.
Envelopes
Follow these guidelines when printing on envelopes:
IMPORTANT
•
Envelopes must not have any fasteners, snaps, or windows, or be made of artificial
materials.
•
Do not use envelopes that discolor or melt at about 190°C (374°F), envelopes which
might emit dangerous fumes when heated, or envelopes that seal with pressure-sensitive
adhesives.
•
Do not use envelopes which are damaged, curled or wrinkled, or that have an irregular
shape.
•
Do not use oversized envelopes, or envelopes with folds.
•
Poorly manufactured envelopes are not recommended.
Postcards
Follow these guidelines when printing on postcards:
IMPORTANT
•
Postcards should not be greater than 0.28 mm in thickness.
•
Postcards should be free of glue, clips, and staples.
•
Do not use postcards that are damaged or curled, or that have special coatings or an
irregular shape.
Paper Requirements
2
2-5