Handling - Canon Laser Shot LBP-1120 User Manual

•
As a general rule, do not use extension cords. Using an extension cord may
result in a fire or electrical shock. If an extension cord must be used, however,
use one rated for voltages of AC 230 V and over and untie the cord binding and
insert the power plug completely into the extension cord outlet to ensure a firm
connection between the power and extension cord.
CAUTION
•
Do not use power supplies with voltages other than those specified herein, as
this may result in a fire or electrical shock.
•
Always grasp the plug when unplugging the power plug. Pulling on the power
cord may expose or snap the core wire, or otherwise damage the power cord. If
the cord is damaged, this could cause a current to leak, resulting in a fire or
electrical shock.
•
Leave sufficient space around the power plug so that it can be unplugged easily.
If objects are placed around the power plug, you will be unable to unplug it in an
emergency.

Handling

WARNING
•
Do not attempt to disassemble or modify the printer. There are high-temperature
and high-voltage components inside the printer which may cause a fire or
electrical shock.
•
Electrical equipment can be hazardous if not used properly. To avoid injury, do
not allow children access to the interior of any electrical product, and do not let
them touch any electrical contacts or gears that are exposed.
•
If the printer makes strange noises, or gives off smoke, heat or unusual smells,
immediately turn OFF the power switch, and unplug the power plug from the
outlet. Then, contact your local authorized Canon dealer. Continued use of the
printer in this condition may result in a fire or electrical shock.
•
Do not use highly flammable sprays near the printer. If gas from these sprays
comes into contact with the electrical components inside the printer, it may
result in a fire or electrical shock.
•
To avoid damage to the power cord and creating a fire hazard, always turn the
main power switch to OFF, and unplug the interface cable when moving the
printer. Otherwise the power cord and interface cable may be damaged,
resulting in a fire or electrical shock.
•
Do not drop paper clips, staples or other metal objects inside the printer. Also,
do not spill water, liquids or flammable substances (alcohol, benzene, paint
thinner, etc.) inside the printer. If these items come into contact with a
high-voltage area inside the printer, it may result in a fire or electrical shock. If
these items are dropped or spilled inside the printer, immediately turn the main
power switch to OFF and unplug the power plug from the outlet. Then contact
your local authorized Canon dealer.
•
When unplugging the USB cable while the power switch is turned ON, do not
touch the metal part of the connector. This may lead to electrical shock.
xv