Entering Accented Characters - Brother PT-H500 User Manual

EDITING A LABEL
Category
Personal
Nature/Earth
Pictograph
The symbols shown in the table may look slightly different on the LCD and when
printed.
The P-touch can display and print a set of accented characters such as other language
specific characters.
1
Enter the character you wish to change to an accented character.
Caps mode can be used with the Accent function.
2
Press the Accent key.
The character you entered will change to an accented character.
3
Press the Accent key repeatedly until the desired accented character is selected, or
select it by using the
The order of accented characters displayed will differ depending on the selected
LCD language.
4
Press the OK or Enter key.
The selected accented character is inserted into the line of text.
• Press the Esc key to return to the previous step.
• Refer to the Accented Character List table for a complete list of all available accented
characters.
8

Entering Accented Characters

Entering Accented Characters
or key.
Icons