Brother PT-H500 User Manual page 34

Setting
Automatically cuts the tape after each label is
printed, leaving a margin of 24.5 mm on each
Large
end.
Margin
Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a 2
Small
mm margin at both ends of each label.
Margin
• Automatically cuts a piece of blank tape
before printing the first label and then cuts the
tape after each label is printed, leaving a 2
mm margin at both ends of each label.
Chain
• Once the last label is printed, the tape is not
fed and cut. Press the Feed & Cut key to feed
and cut the tape.
• Select this setting when printing multiple
copies of a label and you do not want the
labels cut after each label is printed, or when
using Fabric Tape or other special tapes that
cannot be cut by the tape cutter of the
P-touch.
• Once the label is printed, the tape is not fed
No Cut
and cut.
• Press the Feed & Cut key to feed and cut
the tape.
• When using the special tapes that cannot
be cut by the tape cutter of the P-touch,
remove the tape cassette from the P-touch
and use scissors to cut the tape.

Tape Cutting Options
Description

Example
ABC ABC
24.5mm 24.5mm
ABC ABC
2mm 2mm
24.5mm
ABC ABC
2mm 2mm
24.5mm
ABC AB
24.5mm 4mm
Tape Cutting Options
1
2
3
4
5
6
7
8
33