Table of Contents
Advertisement
Terminal Panel
A
AC IN Connector
Connects with the supplied power cord.
B
Main Power Switch
On/Off switch to turn main power ON/OFF.
C
Audio IN1/IN2
Audio signal input from external equipment such as a
computer or player.
D
VGA IN (Mini D-Sub 15-pin)
Analog RGB signals input from a personal computer or from
other RGB equipment. This input can be used with an RGB
or YPbPr source. Please select signal type in TERMINAL
SETTINGS. See page 37.
NOTE: When you use this connector for YPbPr, please use a
suitable signal cable. If you have any questions, please ask
your supplier.
E
DisplayPort OUT
To output DisplayPort signals.
Outputs DisplayPort1 signal.
F
DisplayPort IN1/IN2
DisplayPort signals input.
G
HDMI IN1/IN2
Digital HDMI signals input.
H
DVI IN (DVI-D)
To input digital RGB signals from a computer or HDTV device
having a digital RGB output.
* This connector does not support analog input.
I
RS-232C IN (D-Sub 9 pin)
Connect RS-232C input from external equipment such as a
computer in order to control RS-232C functions.
J
Remote IN
Use the optional sensor unit by connecting it to your monitor.
NOTE: Do not use this connector unless specified.
K
microSD Card Slot
Insert a microSD memory card. To use the Media player,
please connect a microSD memory card to this port
(See page 22).
To install the microSD card slot cover, please refer to
"Installing microSD card slot cover" (See page 22).
L
USB Port
USB1:
Downstream port (USB Type-A).
To connect USB devices.
USB2:
Upstream port (USB Type-B).
To connect external equipment such as a
computer. To use the touch panel function and
to control the monitor from connected external
equipment, please use this port.
USB CM1 (2A): Power supply port.
USB CM2*: Service port. Please do not connect devices.
* USB functionality is available when the optional Raspberry
Pi Compute Module Interface Board and Raspberry Pi
Compute Module are installed.
USB MP:
USB storage device port. This port is for future
software upgrades.
To use the Media player, please connect USB
storage device to this port (See page 18).
MP is an abbreviation of Media Player.
M
VIDEO IN (RCA)
Composite video signal input.
N
LAN Port 1/2 (RJ-45)
LAN connection. See page 47 and page 50.
NOTE: Please give priority for use to LAN1.
O
Audio OUT
Audio signal output from the AUDIO IN1/IN2, DisplayPort and
HDMI to an external device (stereo receiver, amplifier, etc.).
NOTE: This connector is not a Headphone terminal.
P
Internal/External Speaker Switch
: Internal speaker
NOTE: Please turn off the monitor's main power when you
use the Internal/External speaker switch.
English-10
USB Upstream
: External speaker.
Advertisement
Table of Contents
