Download  Print this page

NEC V462 Installation Manual

46” lcd display.
Hide thumbs
Also See for V462
User manual - 43 pages
Manual - 72 pages
Control manual - 71 pages
   

Advertisement

V462 Installation Guide
46" LCD Display
Contents
Product Description and Notes
Tilt Angle and Rotation
Ventilation Recommendations
Display Dimensions
Front, Top, Right, Left, Bottom
Rear
Table Top Stand Dimensions
Optional Speaker Dimensions
Optional Wall Mount Dimensions (WMK3257)
Input Panel, Control Codes

Product Description

Type:
Resolution:
Aspect Ratio:
FCC:
Power Consumption:
BTU's:
NOTES:
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in either landscape or portrait orientation.
www.necdisplay.com
LCD Display
1920 x 1080
16:9
Class B
180W (typ)
614.18 BTU/hour
NEC Display Solutions of America, Inc.
Page 1
Page 1
Page 2
Page 3
Page 4
Page 5
Page 6
Page 7
Page 8
Screen Surface:
Dimensions without stand: 44.2"(W) x 26.2"(H) x 4.2"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
V462
Rev 1.1
Anti-Reflective
44.2"(W) x 27.7"(H) x 13.0"(D)
55.6 lbs
59.7 lbs
Page 1 of 8

Advertisement

   Also See for NEC V462

   Related Manuals for NEC V462

   Summary of Contents for NEC V462

  • Page 1: Product Description

    Distances may vary ±5%. Tilt Angle and Rotation Below are the maximum angles that the monitor can be tilted in either landscape or portrait orientation. www.necdisplay.com NEC Display Solutions of America, Inc. Page 1 Page 1 Page 2 Page 3...
  • Page 2 The ventilation space should not be covered or closed off at the front of the opening. If for some reason the opening needs to be covered, other means of ventilation will need to be incorporated into the design. Contact NEC for design review and recommendations.
  • Page 3: Display Dimensions

    NEC Display Solutions of America, Inc. V462 Installation Guide 46” LCD Display Rev 1.1 Display dimensions www.necdisplay.com V462 Page 3 of 8...
  • Page 4 NEC Display Solutions of America, Inc. V462 Installation Guide 46” LCD Display Rev 1.1 Display dimensions (cont.) www.necdisplay.com V462 Page 4 of 8...
  • Page 5 NEC Display Solutions of America, Inc. V462 Installation Guide 46” LCD Display Rev 1.1 Optional Speaker Dimensions (SP-4046PV) Note: External speakers are optional. The unit already contains 15W Internal speakers www.necdisplay.com V462 Page 5 of 8...
  • Page 6 NEC Display Solutions of America, Inc. V462 Installation Guide 46” LCD Display Rev 1.1 Table Top Stand Dimensions (ST-4620) www.necdisplay.com V462 Page 6 of 8...
  • Page 7 NEC Display Solutions of America, Inc. V462 Installation Guide 46” LCD Display Rev 1.1 Dimensions with optional Wall Mount Kit (WMK3257) Note: Drawing above shown with 400mm extender brackets included with WMK-3257 mount www.necdisplay.com V462 Page 7 of 8...
  • Page 8: Input Panel

    STANDARD CINEMA SCREEN MODE: NORMAL FULL WIDE ZOOM AUTO SETUP EXECUTE NOTE: Contact your NEC rep for codes not listed. NOTE: Use a cross/reverse/null modem cable. Cable Connection Communication Protocol: Interface: RS-232C Communication: Asynchronous Baud Rate: 9600 bps Data Length:...

This manual is also suitable for:

V462-rV462-pc-cre

Comments to this Manuals

Symbols: 0
Latest comments: