Table of Contents
Advertisement
Common, etc.
There
is
Q15
between
temperature setting and
actual room temperature.
What will happen if the time
Q16
setting is changed while in a
timer operation?
In the "Automatic fan speed"
Q17
mode,
the
changes to MED and LO fan
speed.
Nice temperature reservation
In case of "ON" timer, the operation does not
Q18
start at a preprogrammed time but a little
earlier.
The time to start an operation is irregular
Q19
while preprogramming at the same time.
0301E (30CH6) pg 47-68
a
difference
the
room
indoor
fan
59
There may be a difference
A15
between
the
room
temperature setting and
actual room temperature on
account
of
the
room
structure, air flow, etc.
If there is a difference from
the room temperature, adjust
the set temperature to keep
living space at a comfortable
temperature.
A
timer
operation
A16
performed until the time after
changing the time setting.
It is not a trouble. The cold
A17
wind preventive function
operates.
The "Nice temperature reservation" functions.
A18
The operation starts earlier so the room
temperature will be as set at a programmed
time.
The operation starts at most 60 minutes before
a preprogrammed time.
The "Nice temperature reservation" operates.
A19
The starting time depends on the room load.
– 59 –
16/12/05, 2:49 PM
is
Set the temporary switch
normal.
Advertisement
Table of Contents
