Dhcp + L2Tp; Wireless; Basic Settings - CNET CWR-901 User Manual

54mbps wireless-g router

Table of Contents

Cancel: To skip the current settings and jump to the Status page.

Help: To request help information.

3.3.7 DHCP + L2TP

Same as L2TP WAN type, but user only needs to specify Login ID and Password since gateway's

IP address (as L2TP client) is obtained automatically using DHCP.

Select WAN Connection Type: Select the DHCP + L2TP connection

Password: Enter the Password provided by your ISP

MTU Size: MTU is the Maximum Transmission Unit. It specifies the largest packet

size permitted for Internet transmission. Keep the default setting, 1452, to have the

wireless router select the best MTU for your Internet connection.

Silent Timeout: Only used when connection type is set to Dial-On-Demand. The

Silent timeout value is defined as the time for the WAN port to disconnect if the

connection is idle. (not used).

Dial-on-demand: If checked, the wireless router will only dial this session when a

LAN -> WAN packet is received. If unchecked, the wireless router immediately dials

the session when powered up.

Auto Reconnect: If checked, the wireless router redials the session if previously

terminated by ISP.

Dial Status: Current status of this session. Maybe "connected", "connecting" or

"disconnect".

Save and Restart: Save the parameters and reboot the wireless router.

Reset: Click on "Reset" button to undo your changes.

Cancel: To skip the current settings and jump to the Status page.

Help: To request help information.

The Wireless Basic Settings include Alias Name, SSID, Regulation Domain, RF Band, Channel

Number and Operation Mode.

Table of Contents

Show Quick Links

Table of Contents