Battery Installation - LogTag UTREL30-WIFI Quick Start Manual

Battery Installation

The USB cable is the main power method to power
the UTREL30-WiFi unit permanently via the USB
socket.
AAA batteries are another backup power source to
ensure your device continues to record in the event
of a power outage or is unplugged.
1. You will need a small Phillips (cross-shaped)
screwdriver to remove the cover on the back of the
UTREL30-WiFi case.
2. Once you have removed the battery cover, install
the two AAA batteries. Take note of the direction
each battery must be installed.
3. Once both batteries are securely installed, replace
the battery cover and secure via the screw provided.
Page 4