Table of Contents
Advertisement
Installation Guide
Power Monitoring
E31E Series
Gateway
Configuration (cont.)
Z206855-0B
Page 15 of 26
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
1.888.610.7664
d. Highlight Internet Protocol Version 4 (TCP/IPv4), and click OK.
e. Select <Use the following IP Address>. Make note of the IP address that appears, then enter the static IP address (e.g. if the
E31E Series is still set to its default address of 192.168.1.24, then change it to 192.168.1.100). Enter for the 255.255.255.0 subnet
mask. Click OK.
e. Click Close.
3. Open a PC web browser and enter the IP address of the E31E (default address is 192.168.1.24) to access the GUI. The GUI launches
and appears in the browser window.
4. When finished using the GUI, unplug the ethernet cable from the PC and restore the IP settings as needed.
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
www.calcert.com
15
10
20
5
25
0
30
Enter static
IP address
Enter subnet
mask
sales@calcert.com
TM
04142
Advertisement
Table of Contents
