Table of Contents
Advertisement
Installation Guide
Power Monitoring
E31E Series
Gateway
Configuration
Z206855-0B
Page 13 of 26
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
1.888.610.7664
Accessing the Graphical User Interface (GUI)
If the E31E IP address parameters are already configured to work on the network and is being accessed from a PC on that same
network, open a web browser and enter the IP address of the E31E into the address/URL field on the browser. Press enter. The GUI
launches and appears, as shown, in the browser window.
If the E31E IP address parameters are not configured for the network, connect a PC directly and access the GUI from it as follows:
1. Connect a standard CAT5 ethernet cable between a PC and E31E. Secure a ferrite filter (included) around the ethernet cable to
ensure the device meets emission requirements. If the user followed the Installation procedure in this document, then this
cable is already in place.
©2014 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com
TM
04142
Advertisement
Table of Contents
