USING FOR THE FIRST TIME
Changing the light bulb
To fit a new bulb, proceed as follows:
Set the light switch to "OFF".
Push back the bulb cover and open
it (see diagram below).
Remove the old bulb and dispose
of it.
Fit a new bulb.
Close the bulb cover.
Bulb cover
Light bulb
Light bulb specifications
Diameter:
Length:
Voltage:
Type:
22
8 mm
29 mm
12 V direct current,
5 W
Stanley A3022C or a
type with the same
specifications
Wiring
Bulb for the main unit
Light cable for the main unit
Screws
Red = Electrical supply (12 V)
White = Internal lighting system
Black = Ground
Caution:
The screws have different sizes.
Make sure that you insert the
screws in the correct positions.
Make sure that the screws are
screwed tight to ensure a good
ground connection.
Monitor connection
Connecting cable
System cable
Light cable for the main unit
Connecting
cable