Table of Contents
Advertisement
The settings are: 3, 4, 5, 7, 9, 10, 11, NA.
Soft-off by PWRBTN
Pressing the power button for more than 4 seconds forces the system to enter the Soft-Off
state. The settings are: Delay 4 Sec, Instant-Off.
Wake-Up Events
Please refer to section 3-8-2
3-8-1 Power Management
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Power Management
HDD Power Down
Doze Mode
Suspend Mode
↑↓→← Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit
F5:Previous Values
Power Management
This category allows you to select the type (or degree) of power saving which is directly
related to the following modes:
User Define(default)
each of the ranges is from 1 min. to 1hr. except for HDD Power Down that
ranges from 1 min. to 15 min. and disable.
Min Saving Minimum power management. Doze Mode 1H, Suspend Mode=1 hr., Power
Down=15 min.
Max Saving Maximum power management. Doze Mode 1H, Suspend Mode=1 min.,
Power Down=1 min.
HDD Power Down
When enabled and after setting time of system inactivity, the hard disk drive will be powered
down while all the other devices remain active.
The settings are: 1/2/3/4/5/6/7/8/9/10/11/12/13/14/15 Min and Disabled.
Suspend Mode
When enabled and after the set time of system inactivity, all devices except the CPU will be
shut off.
The settings are: l/2/4/8/12/20/30/40 Min, 1 Hour, and Disabled.
3-8-2 Wake up Events
Power Management
User Define
Disabled
Disabled
Disabled
F6:Optimized Defaults F7:Standard Defaults
Allows you to set each mode individually. When not disabled,
36
Item Help
Menu Level >>
F1:General Help
Advertisement
Table of Contents
