Inflating - Advanced Elements Lagoon1 AE1031 Owner's Manual

TM
3.3
IMPORTANT
the spring valves and twist valves located in the section "Understanding your valves". Before
place.
1.
Inflate chamber 2 "main2" until the kayak feels firm to the touch (2.0 psi max).
2.
There should be just a few wrinkles visible on the side GRAY TUBE COVERS.
3.
4.
5.
6. Make sure all valves are closed tightly and properly.
NOTE: Ideally you want to put about half of the air in Chamber 1 and half into chamber 2. This
way if you were to loose pressure in one chamber then you would have the other chamber to
10
Failure to follow these instructions
Be sure to read directions on operating
ak seating area,