Table of Contents
Advertisement
4-3-6.▲/FUNCTION KEY(3-5,Fig.1):
A.When the setting screen press the button, the value increases function.
Long function. press and hold to quickly increase the value
B.In measuring screen (eg SCREEN1) long press button> 2 SEC., Then
switch to the TWA measurement functions (eg SCREEN4).
4-3-7.▼/ALARM KEY(3-6,Fig.1):
A.When the setting screen press the button, the value was down function.
Long press and hold down the value of fast function.
B.In measuring screen (eg SCREEN1) long press button> 2 SEC., Then
Into the ALARM function (eg SCREEN16).
4-4.Setting function easy instructions:
* SET SD F: Executive SD memory card format.
* SET DATE: Into the year、 month、 day adjustment.
* SET TIME: Into the hours、 minutes 、 seconds adjustment.
* SET SP-T: Data logger sampling time setting.
* SET P-OFF: Auto Power Off Setting.
* SET BEEP: Beeper sound ON/OFF setting
* SET DEC: SD Card Decimal character setting USA or EURO.
* SET T-C/F: Temp. Unit ℃/℉ setting.
* SET ALARM: Upper and lower alarm value setting.
* SET PM2.5 Hour TWA: PM2.5 Time-Weighted Average setting.
* SET ESC: Escape setting.
4-5.Setting screen Description:
4-5-1.SET SD F(SD memory card format):
A.Press ▲ or ▼ buttons to select YES or NO, when YES is selected and press
ENTER key to start the Format function.
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting(SET SD F -> SET DATE).
4-5-2.SET DATE(Real time clock setting):(Year/Month/Date,Hour/Minte/Second)
A.Press ▲ or ▼ key year value adjustment, ▲ or ▼ then press and hold up,
down fast adjustment. Press ENTER then the set value is stored and the
month of adjustment functions, and so on the day / time / minute / second to
do the setting.
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting(SET DATE -> SET SP-T).
7
Advertisement
Table of Contents
