Table of Contents
Advertisement
4-5-3.SET SP-T(Data logger sampling time setting):
A. Press ▲ or ▼ key to Data logger sampling time setting, press ENTER KEY
will set the value of the store and into the next function is set
(SET SP-TèSET P-OFF).
B.0 S: Representative Manual Logger function.
C.2〜3600 S: Representative Auto Logger function.
D.When no press ENTER KEY store, press TIME / SET KEY proceed
to the next function setting (SET SP-T -> SET P-OFF).
4-5-4.SET P-OFF(Auto power off setting):
A.Press ▲ or ▼ KEY to select YES or NO, when select YES and press
ENTER KEY AUTO POWER OFF function is started and go to the next
function setting (SET P-OFF -> SET BEEP).
B.When inserted into the DC 9V power adapter in battery mode will be
automatically canceled AUTO POWER OFF function.
C.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting (SET P-OFF -> SET BEEP).
4-5-5.SET BEEP(Beeper sound ON/OFF setting):
A.Press ▲ or ▼ KEY to select YES or NO, when you select YES, press ENTER
KEY function is to store this setting and proceed to the next function setting
(SET BEEP -> SET DEC).
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting (SET BEEP -> SET DEC).
4-5-6.SET DEC(SD Card Decimal character setting):
A.Press ▲ or ▼ KEY select USA or EURO, when the ENTER KEY function is to
store this setting and will advance to the next function setting
(SET DEC -> SET T-C/F).
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting(SET DEC -> SET T-C/F).
4-5-6.SET T-C/F(Temp. Unit ℃/℉ setting):
A.Press ▲ or ▼ KEY select ℃ or ℉, when the ENTER KEY function is to store
this setting and proceed to the next function setting(SET T-C/F -> SET
ALARM).
B.When no press ENTER KEY store, press TIME / SET KEY proceed to the
next function setting (SET DEC -> SET ALARM).
8
Advertisement
Table of Contents
