Table of Contents
Advertisement
2
WARNING
Read and understand the instruction manual before
operating the dust collector. Basic precautions listed
below should always be followed when using your dust
collector to reduce the risk of injury, electrical shock
or fire.
• This dust collector is designed to collect sawdust only.
• Never attempt to use this dust collector to vacuum water
2
or any other liquids.
• Never try to use this dust collector to collect large
wood pieces.
• Never attempt to use this dust collector to collect metal
materials such as screws, nails or other metal parts.
• Always wear approved eye protection and respirator
when emptying collection/filter bags.
2
UNPACKING
Refer to Figure 1.
Check for shipping damage. Check immediately whether all
parts and accessories are included. If anything is missing or
broken, contact your retailer or call 847-780-6120.
• Carefully remove all contents from shipping carton. The
shipping carton contains:
ITEM
DESCRIPTION
A
Motor Housing
2
B
Dust Collection Bag
C
Motor Bracket
D
Wall Mounting Bracket
E
Quick Release Bag Clamp
F
Foam Strip
G
Hardware Bag
(contains four flange bolts)
H
12-10 mm Wrench
Owner's Manual (not shown)
SPECIFIC SAFETY INSTRUCTIONS
ASSEMBLY
QUANTITY
1
1
1
1
1
1
1
• Never operate the dust collector with all blast
gates closed.
• Turn machine off, disconnect power cord and ensure all
moving parts have stopped completely before changing
or emptying the bags.
• ALWAYS ensure collection/filter bags are secured
in place.
• Do not place your hand or tools near the open inlet
while operating. Serious personal injury or damage to
the machine can happen.
• Always connect dust collector to the matched
power source.
IMPORTANT : Always consider safety first as it applies
to your individual working conditions, the environment in
every shop is different.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Figure 1
INSTALLATION
Refer to Figures 2 - 3
CAUTION
Do not attempt assembly if parts are missing.
Call the Customer service line to obtain replacement
parts.
WARNING
Do not operate dust collector until completely assembled.
Do not operate this tool until you have completely read
and understood this manual.
NOTE: After unit is assembled dispose of all packaging
material in an environmentally safe way.
Tools required for assembly:
• 10 mm Wrench
1. Align holes in motor bracket with holes in motor housing,
secure bracket in place with four bolts supplied.
Advertisement
Table of Contents
