Table of Contents
Advertisement
BASIC OPERATIONS
ON/OFF Switch
The keyed switch is intended to prevent unauthorized use
of the dust collector.
1. To turn the dust collector ON insert the yellow key into
the key slot in the center of the switch.
2. Push the key firmly into the slot, then push switch to the
ON position to start the dust collector.
3. To turn the dust collector OFF push the switch to the
down position.
4. Remove the yellow switch key, when the dust collector
has come to a complete stop, by gently pulling it
outward.
WARNING
Remove the switch key whenever the dust collector is not
in use.
Place it in a safe place and out of reach of children.
WARNING
ALWAYS lock the switch OFF when the dust collector is
not in use. Remove the key and keep it in a safe place.
In the event of power failure, blown fuse, or tripped
circuit breaker, turn the switch OFF and remove the key,
preventing accidental startup when power comes on.
OPERATION
Figure 6
Yellow Switch
Operation
1. Position the tool being used close to the dust collector.
2. Connect one end of a dust collector hose to the dust
collector inlet and one end to the machine outlet. Secure
both ends with hose clamps (not included).
3. Turn the dust collector ON. (Refer to On/Off Switch
paragraph in this section of the manual.)
Figure 7
Dust Collector
Hose
On/Off Switch
Key
Dust Collector
Inlet
5
5
Advertisement
Table of Contents
