Table of Contents
Advertisement
2
WARNING
Read and understand the instruction manual before
operating the dust collector. Basic precautions listed
below should always be followed when using your dust
collector to reduce the risk of injury, electrical shock
or fire.
• This dust collector is designed to collect sawdust only.
• Never attempt to use this dust collector to vacuum water
2
or any other liquids.
• Never try to use this dust collector to collect large
wood pieces.
• Never attempt to use this dust collector to collect
flammable or combustible dust/gas. DO NOT use near
any flammable or combustible liquids.
• Never attempt to use this dust collector to collect
anything that is burning or smoking.
• DO NOT use outdoors or on wet surfaces. Rain or
moisture entering the dust collector motor housing/
canister increases the risk of electrical shock.
2
UNPACKING
Refer to Figure 1.
• Check for shipping damage. Check immediately whether
all parts and accessories are included. If anything is
missing or broken, contact your retailer or call
847-780-6120.
• Carefully remove all contents from shipping carton.
NOTE: The loose parts are shipped inside the
collection canister.
The shipping carton contains:
2
ITEM
DESCRIPTION
A
Motor Housing
B
Collection Canister
C
Locking Band
D
Collection Hose
E
Hose Clamps
F
Filter Cartridge
G
Filter Bag
H
Hose Coupler
I
Stackable Hose Adapters
Owner's Manual (not shown)
SPECIFIC SAFETY INSTRUCTIONS
ASSEMBLY
QUANTITY
1
1
1
2
1
2
1
4
• Never attempt to use this dust collector to collect metal
materials such as screws, nails or other metal parts.
• Always wear approved eye protection and respirator
when emptying collection canister or changing filter
cartridge/bags.
• Turn machine off, disconnect power cord and ensure all
moving parts have stopped completely before changing
or emptying the collection canister.
• ALWAYS ensure filter cartridge/bags are secured
in place.
• Do not place your hand or tools near the open inlet
while operating. Serious personal injury or damage to
the machine can happen.
• Always connect dust collector to the matched
power source.
IMPORTANT : Always consider safety first as it applies
to your individual working conditions, the environment in
every shop is different.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
Figure 1
D
F
B
H
C
INSTALLATION
Refer to Figures 1 - 3
CAUTION
Do not attempt assembly if parts are missing.
Call the Customer service line to obtain replace-
ment parts.
WARNING
• Do not operate dust collector until completely
assembled.
• Do not operate this tool until you have completely read
and understood this manual.
NOTE: After unit is assembled dispose of all packaging
material in an environmentally safe way.
E
A
G
I
A
Advertisement
Table of Contents
