Table of Contents
Advertisement
Quick Links
Owner's Manual
Portable Dust Collector
QUESTION...
1•847•780•6120
Visit us on the web at www.southerntechllc.com
You will need this manual for safety instructions, operating procedures, and warranty.
Put it and the original sales invoice in a safe, dry place for future reference.
Model No. DC1510
17-0208
Advertisement
Table of Contents
Related Manuals for PowerTec DC1510
Summary of Contents for PowerTec DC1510
- Page 1 Model No. DC1510 Owner’s Manual Portable Dust Collector QUESTION... 1•847•780•6120 Visit us on the web at www.southerntechllc.com You will need this manual for safety instructions, operating procedures, and warranty. Put it and the original sales invoice in a safe, dry place for future reference.
- Page 2 TABLE OF CONTENTS PRODUCT SPECIFICATIONS SECTION PAGE SAFETY RULES Motor .............. 120V/60Hz Motor Power ..........1-1/2 HP 9.5 Amp Work Preparation Work Area Preparation Filter ..............0.5 micron Tool Maintenance Air Flow ............... 108 CFM Tool Operation Canister Capacity ........13 gallons (50 L) ASSEMBLY Hose Length ..........
-
Page 3: Safety Rules
SAFETY RULES • Keep children out of the work area. Ensure your work WARNING shop is child-proof. Use padlocks, master switches or For your own safety, read and understand all warnings remove switch keys to prevent any unintentional use of and operating instructions before using any tool or power tools. -
Page 4: Specific Safety Instructions
SPECIFIC SAFETY INSTRUCTIONS • Never attempt to use this dust collector to collect metal WARNING materials such as screws, nails or other metal parts. Read and understand the instruction manual before • Always wear approved eye protection and respirator operating the dust collector. Basic precautions listed when emptying collection canister or changing filter below should always be followed when using your dust cartridge/bags. -
Page 5: Power Source
GROUNDING INSTRUCTIONS Tools required for assembly: • Phillips head screwdriver WARNING 1. Slide the filter bag over the filter cartridge. 2. Fold and tuck the top of the bag into the Improper connection of equipment grounding conductor filter cartridge. can result in the risk of electrical shock. Equipment 3. -
Page 6: Electrical Connections
Extension Cord Length Figure 5 Wire Size…………….. 18 A.W.G. Up to 50 ft NOTE: Using extension cords over 50 ft. long is not recommended. MOTOR The dust collector is assembled with motor and wiring installed. The electrical wiring schematic is shown in Figure 5. -
Page 7: Operation
OPERATION BASIC OPERATIONS To Start Refer to Figures 6 - 7 • Place the dust collector's ON/OFF switch in the ON (I) position. Before Starting • Turn the machine ON. Figure 7 • Place the dust collector near the dust producing machine to be used. -
Page 8: Parts Illustration
PORTABLE DUST COLLECTOR PARTS ILLUSTRATION... - Page 9 PORTABLE DUST COLLECTOR PARTS LIST Key No. Part No Description DC1510001 Power cord DC1510002 Cord bush DC1510003 Switch Gorbo XCK-019 DC1510004 Left guard DC1510005 Lock nut M5 DC1510006 Philips screw M5X25 DC1510007 Philips screw M5X45 DC1510008 Right guard DC1510009 Circle sponge DC1510010 Long sponge DC1510011...
-
Page 10: Troubleshooting
TROUBLESHOOTING SYMPTOM POSSIBLE CAUSE(S) CORRECTIVE ACTION Motor will not start 1. Low voltage 1. Check power line for proper voltage 2. Open circuit in motor or loose 2. Inspect all lead connections on motor for loose or connections open connection 3. -
Page 11: Warranty
30- DAY SATISFACTION GUARANTEE POLICY During the first 30 days after the date of purchase, if you are dissatisfied with the performance of this POWERTEC tool for any reason, you may return the tool to the retailer from which it was purchased for a full refund or exchange. You must present proof of purchase and return all original equipment packaged with the original product. - Page 12 Southern Technologies, LLC 3816 Hawthorn CT, Waukegan, IL 60087...